- Other Vehicle Equipment[1]
- Chargers[1]
- Other Electrical Equipment[6]
- Other Power Supplies[1]
- Other Analysis Instruments[6]
- Battery Testers[6]
- Energy Meters[1]
- Multimeters[1]
- Other Electrical Instruments[1]
- Power Meters[1]
- Resistance Meters[2]
- Measuring & Analysing Instrument Design Services[1]
- Other Optics Instruments[4]
- Testing Equipment[6]
- Fiber Optic Equipment[6]
- Other Telecommunications Products[6]
- Contact Person : Ms. Xie Shunli
- Company Name : Shaanxi Aitelong Technology Co., Ltd.
- Tel : 86-29-65660086
- Fax : 86-29-65660082
- Address : Shaanxi,Xi'an,2C of building 11th, NO.2 West Technology Enterprise Accelerator, Qinling Avenue,Caotang Science and Technology Industry Base,
- Country/Region : China
- Zip : 710304
Related Product Searches:DSL&PON Tester,High Quality,adsl test, PON test,SAT-701H
SAT-701H DSL&PON Tester is a hand-held communication instrument. It is particularly applicable for activating operation, acceptance and maintenance of ADSL and PON, widely used by telecom operators, and is the best choice of telecommunication engineers and technicians.
Key Features
l English menu, large color touch screen, and simple operation;
l Portable design; built-in lithium battery support 8-hour working
l Setups and test results can be saved, deleted, has power-off memories;
l Save 1000 test results;
l Alarm detection and indication;
l Via U disk or LAN to exchange test data , to saving, analyzing and printing for test results;
l On-line updating of software.
Major Function
For ADSL physical layerl Fast channel and interleave channel testing.
l Line parameters testing: up and down channel rate, line attenuation, noise margin, output power, and utilization rate of channel.
l Line error and alarm performance analysis
l DMT sub-channel carrier pattern
Display modulated bit numbers on each DMT sub-channel by diagram and digital mode
l Real time display user’s connection state, testing progress, local equipment manufacturer information, and version information.
For ADSL network layerl ISP PING test
l WAN PING test:
Directly PING the website IP or web address to local WAN to verify the connectivity of WAN link.
l Completely instead of ADSL MODEM to simulate ISP logon, and verify the operation performance of user's terminal equipment.
l Testing VPI/VCI.
l Webpage browsing
l Testing network layer:
Including Ping, Ipconfig, Route and Tracert testing
l Testing webpage speed
l Testing FTP client-side
For LANl LAN PING test
l Webpage browsing
l Testing network layer:
Including Ping, Ipconfig, Route and Tracert testing
l Testing webpage speed
l Testing FTP client-side
l Testing PPPoE dial-up.
l Testing Network Neighborhood.
Test LAN, and search the PC in LAN, check the PC name, IP and MAC address.
l Simulated PC logon
Simulate user terminal PC logging on ISP to verify if ADSL user can surf on the Internet.
More functions for ADSL line:l Digital multi-meter (DMM) test
Test AC/DC voltage, loop resistance, insulation resistance, capacitance, etc.
l Estimate the distance of telephone wire.
For PONl Test power value of 1490nm, 1550nm and 1310nm in PON system at the same time.
l Test burst mode of 1310nm up wavelength.
l Dual-port and pass-through design, it guarantees communication from OLT to ONT during test.
l Ten groups threshold can be selected.
l Have pass-through, alarm and pass-through failure indication; three indicators display the optical path state.
l Via software to set threshold, upload data and calibrate wavelength.
VFL (Optional function)l Transmit continuous light
l Output power is optional, 2mW, 5mW, 10mW.
l Fiber identification distance is over 5Km
Technical Specifications
Connectors: RJ11 --- WAN interfaceRJ45 --- LAN interface
USB --- interface
Applicable standards: ITU G .992.1(G.DMT)ITU G .992.2(G.lite)
ITU G .994.1 G.hs
ITU G .992.3(ADSL2)
RE-ADSL
ITU G .992.4(Splitterless ADSL2)
ITU G .992.5 (ADSL2+)
ITU G .992 AnnexL
ANSI T1.413 Issue 2
Upper layer protocol support: PPP over Ethernet (PPPoE)Ethernet over ATM (RFC-1483B)
RFC-1483R
Line performance index: down speed 24Mb/s, and up speed 1.2Mb/s,Maximum transmission distance 6.5Km
Digital multi-meter:DC voltage: -400V~+400V, accuracy: ±5%± 2V
AC voltage: 0~290V, accuracy: ±5% ±2V
Line loop resistance: 0~20K Ω, accuracy: ±3%
Insulation resistance: 0~1.0MΩ, accuracy: ±0.1MΩ; 1.0~50MΩ, accuracy: ±10% ±0.5MΩ;
Capacitance: 0~10nF,accuracy: ±2nF; 10~1000nF, accuracy: ±5%
PON Technical IndexCalibrate Wavelength | 1310nm up Test | 1490nm down Test | 1550nm down Test |
Passband (nm) | 1260~1360 | 1470~1505 | 1535~1570 |
Detection Range (dBm) | -40~+10 | -40~+10 | -40~+25 |
Isolation of 1310nm (dB) | - | >40 | >40 |
Isolation of 1490nm (dB) | >40 | - | >30 |
Isolation of 1550nm (dB) | >40 | >40 | - |
Natural Uncertainty (dB) | ±0.5 | ||
Polarization Dependent Loss (dB) | ±0.25 | ||
Linearity (dB) | ±0.1 | ||
Through Insertion Loss (dB) | <1.5 |
General Specifications
Power supply1) Special power adapter
Input: AC220V 50Hz Output: DC 9V 1.2A
2) Built-in rechargeable battery
4000mAh 7.2V rechargeable lithium battery
Working time: 8 hours
Charging time: 6 hours in closed state, and 10 hours in open state
Dimensions and weight:L×W×H: 220×162×48 (mm)
Weight: 0.9kg
Ambient parameters:Working temperature: -10 -+50°C
Storage temperature: -40 -+70°C
Humidity: 5%- 90% non-condensing
DSL&PON Tester