- Other Electrical Instruments[1]
- Other Telecommunications Products[6]
- Testing Equipment[6]
- Fiber Optic Equipment[6]
- Chargers[1]
- Other Vehicle Equipment[1]
- Other Power Supplies[1]
- Other Electrical Equipment[6]
- Energy Meters[1]
- Resistance Meters[2]
- Battery Testers[6]
- Measuring & Analysing Instrument Design Services[1]
- Other Analysis Instruments[6]
- Other Optics Instruments[4]
- Multimeters[1]
- Power Meters[1]
- Contact Person : Ms. Xie Shunli
- Company Name : Shaanxi Aitelong Technology Co., Ltd.
- Tel : 86-29-65660086
- Fax : 86-29-65660082
- Address : Shaanxi,Xi'an,2C of building 11th, NO.2 West Technology Enterprise Accelerator, Qinling Avenue,Caotang Science and Technology Industry Base,
- Country/Region : China
- Zip : 710304
E1/T1 Tester
Related Product Searches:E1/T1 Tester,High Quality,E1/T1 Tester, data testing,SAT-1BS
GeneralSAT-1BS Series 2M Transmission Analyzers is mainly used for measuring of the error rate of data communication and for the analysis of line fault and causes, and very suitable for the parameter measurement and routine maintenance testing of 2M system, N×64K communication channels.Major Features·English menu. Large screen. Easy operation.·Multitask operation (It is allowed to conduct a test while browsing previous records).·As many as 9 test settings and 20 groups of test results can be stored, and kept in memory in the event of power failure. .·Communication with a PC is available to allow test data storage, analysis and printing to be carried out on the PC, or directly connected to a micro printer. ·The instrument can be powered on or off at certain times for testing purpose. ·Column diagram analysis of alarms and error codes;·Software updating online.Major Functions·Service-interrupted error code testing;·Error code testing online;·Framing and non-framing signals generation and reception;·2 Mbit/s non-framing error code performance testing;·2 Mbit/s framing N×64kbit/s channel error code performance testing;·Performance testing of bit error, coding error, frame error, CRC error and E bit error;·Alarm testing of signal loss, AIS alarm, frame remote alarm, multiframe remote alarm, out-of-frame, and out-of-pattern synchronism ·Frequency swing testing;·Line signal level testing;·Speech channel signal level and frequency testing;·Pattern slip testing;·Straightforward signaling·Audio frequency testing;·Loop circuit time lag testing;·Automatic protection switching time testing (APS);·Sound monitoring;·Signaling state display. Voice channel content display. Voice channel busy indication;·Column diagram analysis of alarms and error codes;·Time sot content analysis;·Frame content analysis; ·G. 821/G. 826/M. 2100 error code performance analysis;·Several kinds of error code and alarm insertion;·Three input modes (terminating, bridging and monitoring);·Two clock options (internal and picking-up);·RS-232 interface for printing result;·Equidirectional 64k testing;·V.24/RS232, V.35, V.36, X.21, RS-449, RS-485, EIA-530 and EIA-530A data testing.Technical Index·2M Technical Index(1) Signal input rate: 2048kbit/s±100ppmG.703 requirement±50PPM(2) Signal coding: HDB3, AMI.(3) Input jitter tolerance: Up to the requirement of Figure 10.1.
Fig.10.1 Input Jitter Tolerance
(4) Input balance response: Attenuation complies with the law of square root of frequency, and is within the range of 0 to 6dB at 1024 kHz.(5) Input Impedance(5.1) Unbalance terminating: 75ΩBalance terminating: 120Ω.Reflection loss >18dB within 50Hz∼3100kHz.(5.2) Unbalance bridging: >750ΩBalance bridging: >1200Ω(5.3) Unbalance monitoring: 75Ω, 26dB gainBalance monitoring: 120Ω, 26dB gainReflection loss >18dB within 50Hz∼3100kHz.(6) Signal structure(6.1) Non-frame structure(6.2) Frame structure: PCM30, PCM31, PCM30CRC, PCM31CRCFrame structure complies with the requirement of G. 704.(7) Testing pattern: 26-129-1211-1215-1220-1223-1, and artificial code(8) Impedance of output interface:(8.1) Non-balance 75Ω, up to G. 703(8.2) Balance 120Ω, up to G. 703.(9) External clock input(9.1) Signal form: HDB3, NRZ(9.2) Balance terminating resistance: 120ΩUnbalance terminating resistance: 75Ω.Balance bridging resistance: >1200ΩUnbalance bridging resistance: >750Ω.(10) Error code insertion: None, single, or ratio 10-1 ~ 10-7.Other Parameters·Power supply(1) Special power adapterInput: AC220V 50HzOutput: DC 9V 1A(2) Internal rechargeable battery 4000mAh, 6V nickel-hydrogen rechargeable batteryWorking time: 8 hoursCharging: 8 hours at power-off state, and 12 hours at power-on state.·Printer: μP40-TS(CH) Chinese character micro-printer with standard level and serial port.·Dimension and weightL×W×H: 200×160×42mmWeight: 950g·Ambient para metersOperation temperature: 0∼40Storage Temperature: -30∼+70 Humidity: 5%∼90%, non-condensingStandard Configuration
| No. | Item | Qty |
| 1 | SAT-1BS Series 2M Transmission Analyzers | 1 set |
| Document | ||
| 2 | Users manual | 1 pc |
| 3 | CD | 1 pc |
| Bundle Accessories | ||
| 4 | 75ΩBNC-J5 testing wire | 1 pc |
| 5 | RS232 interface wire | 1 pc |
| 6 | Power adapter | 1 pc |
| 7 | Portable bag | 1 pc |
E1/T1 Tester
